SATELLITE SIGNAL METERS
No more guessing with the "LOCK" (FOUND) feature! It will positively ID the satellite you are looking for. The SUPER TRACKER satellite metercomes with the global data of satellite channel plan, you can also edit your satellite list and upload it to your SUPER TRACKER meter via PC.
The SUPER TRACKER Satellite meter can also power the SL3s or SL5s SWM LNB from DIRECTV without using a switch or power supply.
|75 Ohm, F-connectors|
|Measuring method:||Digital and Analog|
|RF Signal:||Thermometer scale|
|Quality derived:||From BER – bit error rate|
|Scales Showing:||Max signal and max value|
|Easy Find Satellite:||
By using Symbol Rate/FEDC
|Search automatically:||By DVB-S transponders using advanced demodulator to determine FEC & Symbol Rate|
|Spectrum Analyzer:||950 MHz to 2150 MHz|
|Backlit:||128x64 Pixels LCD
|PC connection:||RS232 with DB9 connector|
|LNB Power:||13V or 18V. 21V selectable|
|22 KHz Tone:||Standard 22 KHz signal superimposed at 0.65v p-p on LNB-A
|DiSEqC:||Yes, according to 1.0
|Battery pack:||Rechargeable NI-Mh battery|
|Battery Life:||About 1 hour on fully charged
|Weight:||About 0.7 Kg including batteries|
100-240vac 12V, 1.2 A
Orange rubber casing
The SUPER TRACKER is developed by Orbital Tracker for exact alignment and adjustment of satellite dishes. It is designed to be extremely easy to use. Simply select the satellite you want to find or install and the meter will try to identify that satellite only.
When finding the satellite the meter will show exact digital readouts for SNR and Quality in order to get a perfect result of the installation.
The SUPER TRACKER is microprocessor controlled, making it very reliable and accurate. Signal strength is presented on the LCD-display.
The meter searches for one satellite at a time in "Satellite Search" mode. You can also choose to view the signal in spectrum mode.
The SUPER TRACKER is very sensitive and can detect even the weakest satellite signals. The instrument can supply Voltage (13/18/21 Volt), 22 kHz and DiSEqC for direct connection to LNBs. The meter is short-circuit protected by an automatic current sensing circuit.
The SUPER TRACKER is charged via an external DC power-source or a 12 V car charger. The unit has a NI-MH removable battery pack . The unit will operate for about one hour with fully charged battery pack.
The instrument starts in the "Satellite Search" mode which makes it easy to detect the satellite desired. The instrument has a preset list of satellites which can be selected by using the Up/Down buttons. When a satellite is displayed, the meter immediately starts to search for that satellite.
The signal level will increase on the signal bar if any satellite signal is detected. If the beeper is enabled, then the pitch of the beeper will increase with signal strength. Once the instrument locks on a satellite transponder, the display is changed. Once locked on a transponder, the SNR (signal to noise ratio) bar and the Quality bar (derived from BER - bit error rate) are displayed.
Once “LOCKED” on a signal, the satellite is confirmed with the MPEG data stream using the TSID and ONID (transport stream ID and Original Network ID) for the chosen transponder.
The sequence of steps in locking are:
If the ONID and TSID do not match, then “Wrong Satellite” is displayed alternating with the actual ONID and TSID found for this transponder. When the ONID and TSID to match are both zero, then the actual ONID and TSID are displayed.
With the SUPER TRACKER you can edit your satellite list via a computer. You will need to download the STracker_List_Editor software and the US Satlist list.
When the STracker_List_Editor is loaded, it will show the last edited satellite list. Use “Import List” to load a satellite list to edit. Select the US Satlist.
The SUPER TRACKER Satellite Signal Meter comes with this satellites from factory.