The MINI TRACKER satellite Meter with Digital Display is ORBITAL TRACKER's entry level meter; it is far superior than the old style analog meters.

• Connect the Mini Tracker Satellite Meter  to your LNBF and Receiver to track the clearest setting for the satellite you wish to tune to.
• The LED displayer of the Mini Tracker Satellite Meter helps you know the strength of the signal clearly.
• The Audio tone in this satellite meter helps you align satellite antenna to signal.
• Audio signal gets louder at the best selling.
• Works with multiple dish systems.
• Close or open the audio tone.
• The Satlink Mini Tracker Satellite signal finder has four steps gain for the satellite signal, you can increase or decrease the gain of the meter.

CONNECTIONS & OPERATION:

• Connect a jump cable from LNB to satellite Finder Mini Tracker "Satellite" port. Connect the "Receiver" port, a DC 13-18v power comes from satellite receiver.
• Make sure that Satellite finder is properly connected. Plug in the AC cord and turn on the satellite receiver.
• Set the dB to be one or 2 by using the ATT button, then signal LED will show from 15 to 30, then you can adjust the dish position, when you hear the buzzer alert and the value of signal strength will be more and more, than means you get the satellite signal.
• Set the dB to be 3 or 4, adjust ythe dish again and again untill the vaolue of signal strength is maximum, now you can see the LOCK light in the satellite receiver, if the lock light is sighting, that mean you find the disired satellite. Otherwise you need to adjust the dish again.

IMPORTANT NOTES:

• Do not place the Mini Tracker Satellite Signla Merer in front of the dish.
• When using high gain LNB, insert a 5 db attenuator between LNB and satellite finder, or replace the jump cable to be a 20ft RG-59U
• The max length for cable from dish to satellite finder is 5 meters.